Περιγραφή
1050 Magnetic Side-Flexing
Single Hinge Chain
High-performance modular conveyor chain engineered for curved and straight conveying lines — trusted by UK food processing, packaging, and logistics operations.
The 1050 Magnetic Side-Flexing Single Hinge Chain represents a step forward in modular plastic conveyor belt engineering. Designed to navigate both straight runs and tight curved sections without compromising throughput or structural integrity, this chain delivers exactly what demanding UK production environments require — consistent tension distribution, reliable magnetic holding performance, and a side-flexing radius that keeps conveyor layouts compact without sacrificing capacity. Whether you operate a high-volume food processing plant in the Midlands, a packaging line in Manchester, or a distribution facility near London, this chain brings the kind of dependable performance that keeps operations moving around the clock.
What distinguishes the 1050 series from conventional single hinge chains is the integration of magnetic retention within the belt module itself. Products passing over magnetised sections of the conveyor remain securely in place even when the belt curves laterally or negotiates elevation changes — a critical advantage when handling small metal components, capped bottles with metal closures, or any product line where slippage causes rejects or downtime. The single hinge design further simplifies cleaning and maintenance, reducing scheduled downtime in facilities subject to UK food safety regulations or pharmaceutical hygiene standards.
Why UK Manufacturers Choose This Chain
Magnetic Retention
Built-in magnetic functionality securely holds metal-capped or ferrous products on curved sections, eliminating slippage-related stoppages and reducing reject rates in high-speed lines.
True Side-Flexing Capability
With a minimum sideflex radius of just 500 mm, conveyor layouts can curve tightly around obstacles, keeping floor space utilisation efficient — a genuine advantage for UK facilities working within constrained plant footprints.
Single Hinge, Easy Maintenance
The single hinge architecture means fewer parts to inspect, quicker module replacement, and simpler wash-down procedures — ideal for food-grade and pharmaceutical environments where hygiene compliance is non-negotiable.
Ευρύ φάσμα θερμοκρασίας
Operational across 4°C to 64°C in both dry and wet environments, this chain suits everything from chilled storage conveying to heated processing lines, without material degradation or dimensional instability.
High Working Load
Rated to a maximum working load of 1650 N at 21°C, the 1050 series handles demanding production loads with confidence, making it suitable for heavy packaging and bulk transfer applications across UK logistics operations.
Dual Material Options
Available in XLG (extended-life grade) and PS (polystyrene-based) materials, allowing engineers to select the right compound for chemical exposure, surface friction, and cost requirements specific to their line conditions.
Technical Specifications
The table below contains the complete verified performance parameters for the 1050-FGM-K330 chain. These figures are drawn directly from factory-issued engineering data sheets and represent values tested under controlled conditions. When specifying this chain for a new conveyor design or replacement project, these figures should be cross-referenced against your line tension calculations, bend geometry, and ambient temperature profile. Our engineering team is available to assist UK customers with conveyor system sizing at no charge.
| Belts Type | Pitch (mm) | Backflex Radius Min (mm) | Sideflex Radius Min (mm) | Working Load Max N (21°C) | Temp Range Dry (°C) | Temp Range Wet (°C) | Weight (Kg/m) | Belt Material |
|---|---|---|---|---|---|---|---|---|
| 1050-FGM-K330 | 25.4 | 130 | 500 | 1650 | 4–64 | 4–64 | 1.5 | XLG |
| 25.4 | 130 | 500 | 1650 | 4–64 | 4–64 | 1.5 | PS |
Engineering Drawing
1050-FGM-K330 dimensional reference drawing — contact us for CAD files
How It Works, What It’s Made Of, and Where It Belongs
🔭 Operating Principle
The 1050 chain operates on a hinge-pin modular system where individual plastic modules interlock through a central rod. As the belt travels around the drive sprocket and along the return path, each module pivots independently — enabling both backflex and sideflex motion. The magnetic elements embedded within the module face create a localised holding field that attracts and retains ferrous or capped metal products flush to the belt surface, preventing shifting even through lateral bends. Drive energy transfers from the sprocket teeth directly to the module tabs, distributing tension evenly across the belt width and preventing premature wear at any single contact point. The geometry of the 25.4 mm pitch allows smooth meshing with standard drive components without requiring bespoke machinery.
🛠 Material Composition
XLG (Extended-Life Grade) compounds offer superior wear resistance and are the recommended choice for abrasive or chemically challenging environments. The material retains dimensional stability across the 4°C–64°C service window and resists cracking under cyclic loading — particularly relevant in UK facilities that alternate between ambient and chilled zones. PS (polystyrene-based) material provides a cost-effective alternative where chemical exposure is limited and the primary requirement is mechanical integrity at standard conveying speeds. Both materials are manufactured to tight dimensional tolerances, ensuring interchangeability with existing 1050-series hardware and reducing the cost of partial belt replacement or section repair. Neither material requires lubrication under normal operating conditions, simplifying maintenance schedules significantly.
🏭 Application Environments
This chain finds its natural home in food and beverage bottling lines where metal-closure bottles must navigate S-curve conveyors at pace. Automotive component sub-assembly lines across the West Midlands and Yorkshire use magnetic side-flexing belts to manage ferrous fasteners and stamped parts through automated inspection zones without product scatter. In e-commerce fulfilment centres across the South East, the 1050’s tight turning radius allows belt routing around structural columns and between dense racking systems. Pharmaceutical packaging lines benefit from the chain’s smooth top surface and easy wash-down profile, which aligns with GMP hygiene requirements. Cold storage applications — including chilled dairy conveyors and frozen food lines — operate confidently at the 4°C lower temperature bound.
Compatible Drive Components
To build a complete conveyor system around the 1050 Magnetic Side-Flexing Single Hinge Chain, the correct sprocket selection is critical for achieving precise pitch engagement and minimising vibration at the drive and idle ends. We supply purpose-matched sprocket components used across UK and European conveyor installations:
⚙️ 1775 Sprocket Drive Wheel
The positively-driven sprocket wheel for the drive end of your conveyor, engineered for precise tooth-to-module engagement and consistent belt tracking at varying line speeds.
⚙️ 1775 Sprocket Idler Wheel
The return-end idler sprocket, designed to support smooth belt tracking, maintain correct belt tension, and reduce wear on the module hinge rods over extended operating cycles.
Customer Success: Midlands Bottling Plant Cuts Downtime by 34%
A medium-scale beverage bottling operation based in Coventry, West Midlands, had been running steel-top modular belts on its twin-track metal-cap bottling line for several years. The existing belts struggled consistently on the facility’s two S-curve conveyor sections, where capped bottles would drift laterally at speeds above 18 m/min, generating rejected product and unplanned stoppages averaging two per shift. Maintenance engineers were spending roughly 14 hours per week on belt adjustments and cleaning of product debris accumulated in the curve zones.
Following a site assessment carried out in Q3, the facility switched both conveyor lines to the 1050 Magnetic Side-Flexing Single Hinge Chain in XLG material. Within three weeks of commissioning, unplanned stoppages on the curve sections dropped to zero. Product rejection rates at the downstream capping inspection camera fell by 27%. Maintenance hours attributed to belt-related issues reduced from 14 hours per week to under 4 hours — a 34% reduction in total conveyor-related downtime across the production quarter. The plant engineering manager noted that wash-down time also shortened, as the open module structure released trapped liquid more effectively than the prior steel-top belt.
“We’d been wrestling with bottle drift on those curves for two years. After fitting the 1050 magnetic chain, both conveyor lines have run without a single unplanned stop through the whole autumn production run. We’ve ordered a third line’s worth.”
James Holloway
Plant Engineering Manager — Beverage Manufacturer, Coventry, UK
“The single hinge design is genuinely easier to maintain than anything we’ve used before. Module swaps take minutes, not half a shift. The magnetic grip on our capped vials through the curve section has been flawless — pharma compliance auditors were satisfied on first inspection.”
Claire Edmonds
Operations Director — Pharmaceutical Packaging, Manchester, UK
“We supply modular conveyor systems to food manufacturers across Scotland. The 1050 magnetic chain has become our go-to specification for any curved section handling metal-capped product. Lead times from the factory have been consistent, and the technical support team knows their product inside out.”
Stuart Mackay
Director — Conveyor Systems Integrator, Glasgow, Scotland
Factory Capabilities & Custom Solutions
Our manufacturing facility operates precision injection moulding lines running 24 hours across weekday production cycles, with dedicated quality control for dimensional accuracy and magnetic element retention force. Beyond standard catalogue specifications, our engineering team provides a comprehensive product customisation service that has supported UK integrators and end-users for over a decade. Custom belt widths, non-standard pitch configurations, colour coding for food line segregation, and surface texture modifications are all managed in-house — from initial drawing approval through to first-article inspection and batch shipping. For UK customers requiring specific documentation for food safety audits or CE marking purposes, our technical team prepares the relevant compliance records as part of the order process. We also offer emergency replacement cutting and shipping for UK customers experiencing critical line downtime, with expedited freight options available through our logistics partners.
240+
Active domain product lines
18+
Years of conveyor belt expertise
100%
Custom dimension capability
UK
Freight & compliance support
Συχνές ερωτήσεις
Ready to specify the 1050 Magnetic Side-Flexing Single Hinge Chain for your conveyor project?
plastic-modular-belt.com | [email protected] | edit by gzl
