{"id":1123,"date":"2026-09-09T06:54:08","date_gmt":"2026-09-09T06:54:08","guid":{"rendered":"https:\/\/plastic-modular-belt.com\/?post_type=product&p=1123"},"modified":"2026-09-09T06:54:08","modified_gmt":"2026-09-09T06:54:08","slug":"perforated-flat-top-vacuum-conveyor-belt","status":"publish","type":"product","link":"https:\/\/plastic-modular-belt.com\/el\/product\/perforated-flat-top-vacuum-conveyor-belt\/","title":{"rendered":"Perforated Flat Top Vacuum Conveyor Belt"},"content":{"rendered":"
\n
\n
\n

Plastic Modular Belt \u00b7 UK Industrial Supply<\/p>\n

Perforated Flat Top Vacuum Conveyor Belt<\/h2>\n

Model 5935-FT-VAC \u2014 engineered for vacuum-assist conveying across food processing, packaging, and precision manufacturing lines throughout the UK and Europe.<\/p>\n

Get a Quote \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\n
\n

What Makes This Belt Different<\/h2>\n

\"PerforatedThe Perforated Flat Top Vacuum Conveyor Belt (5935-FT-VAC) is a high-performance plastic modular belt designed with a precisely arranged perforation pattern across its flat top surface. This open-area structure allows negative pressure \u2014 generated by suction fans beneath the conveyor \u2014 to hold lightweight, fragile, or irregularly shaped products firmly against the belt surface during transit. The result is controlled, slip-free transport without mechanical clamps or guides.<\/p>\n

Available in three material grades \u2014 XLG, PS, and XP \u2014 the belt accommodates working temperatures from 4\u00b0C to 105\u00b0C and handles working loads of up to 13,000 N at 21\u00b0C. With a pitch of 19.05 mm and a minimum backflex radius of just 25 mm, it integrates smoothly into compact conveyor frames used across UK food, pharmaceutical, and light industrial environments.<\/p>\n

Whether you are replacing an existing belt on a vacuum-hold-down line or specifying a new system for your facility, this belt delivers repeatable results session after session. Non-standard widths are available on request \u2014 our technical team will advise on optimal perforation ratios and vacuum fan sizing.<\/p>\n

Request a Quote<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n

Related Flat Top Conveyor Belts<\/h2>\n

\nFlat Top Series<\/span>
\nFlat Top Straight Run Conveyor Belt
\nView Product \u2192<\/span>
\n<\/a>
\n
\nGrid Series<\/span>
\nGrid Straight Run Conveyor Belt
\nView Product \u2192<\/span>
\n<\/a><\/div>\n<\/div>\n
\n

How Vacuum Conveying Works<\/h2>\n
<\/div>\n

Vacuum conveyor belts operate on a straightforward pressure differential principle. A suction plenum or vacuum chamber is mounted directly beneath the conveyor bed. As the belt moves over this chamber, air is drawn downward through the perforations in the belt surface, creating a localised low-pressure zone immediately above the belt. Atmospheric pressure above the product then pushes it firmly against the belt, maintaining contact and preventing slippage even during acceleration, deceleration, or inclined conveying.<\/p>\n

The 5935-FT-VAC’s perforation geometry is engineered to deliver adequate open area for effective vacuum hold-down without compromising the structural integrity of the belt module. The flat top surface ensures full product contact, eliminating the mark-free transfer that pinch-point or gripper systems can leave on sensitive substrates like baked goods, printed packaging, or pharmaceutical blisters.<\/p>\n

Because the vacuum force is distributed evenly across the belt width, even thin-film labels, foil laminates, and lightweight cardboard blanks travel with complete stability. British food manufacturers and packaging converters in the Midlands and North West have found this especially valuable on high-speed lines where belt speeds exceed 40 m\/min.<\/p>\n

\n
\n

19.05 mm<\/p>\n

Belt Pitch<\/p>\n<\/div>\n

\n

13,000 N<\/p>\n

Max Working Load (Dry)<\/p>\n<\/div>\n

\n

4\u2013105\u00b0C<\/p>\n

Working Temperature Range (XP)<\/p>\n<\/div>\n

\n

25 mm<\/p>\n

Min Backflex Radius<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n

Material Grades & Properties<\/h2>\n
<\/div>\n

Three material grades are available for the 5935-FT-VAC, each optimised for different operating environments. Choosing the correct material ensures the belt meets both mechanical demands and compliance requirements \u2014 critical for UK food-grade and pharmaceutical production lines.<\/p>\n

\n
\n

XLG<\/p>\n

Acetal Copolymer<\/p>\n

Excellent chemical resistance and dimensional stability. Ideal for dry food environments and general industrial conveying. Working temperature 4\u201365\u00b0C. Weight: 6.3 kg\/m\u00b2.<\/p>\n<\/div>\n

\n

PS<\/p>\n

Polypropylene<\/p>\n

Lightweight and corrosion-resistant, suited to wet wash-down environments and humid processing areas. Working temperature 4\u201365\u00b0C. Weight: 6.3 kg\/m\u00b2. Low water absorption retains dimensional form.<\/p>\n<\/div>\n

\n

XP<\/p>\n

High-Temperature Polymer<\/p>\n

Designed for high-temperature applications such as tunnel ovens, heated drying lines, and sterilisation conveyors. Extended temperature range 4\u2013105\u00b0C. Lighter at 4.9 kg\/m\u00b2 with a max load of 7,000 N.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n

Technical Specifications<\/h2>\n
<\/div>\n

The table below reproduces the full factory specification for the 5935-FT-VAC Perforated Flat Top Vacuum Conveyor Belt. Non-standard belt widths are available \u2014 please contact our sales team directly.<\/p>\n

\n\n\n\n\n\n\n\n\n
Belts Type<\/th>\nPitch
\n(mm)<\/th>\n		Backflex Radius (Min)
\n(mm)<\/th>\n		Working Load (Max)
\nN (21\u00b0C)<\/th>\n		Working Temperature \u00b0C<\/th>\nWeight
\nKg\/m\u00b2<\/th>\n		Belt Material<\/th>\n\u03a0\u03bb\u03ac\u03c4\u03bf\u03c2 \u03b6\u03ce\u03bd\u03b7\u03c2<\/th>\n<\/tr>\n
Dry<\/th>\nWet<\/th>\nMold Parts Width (mm)<\/th>\nStandard Assembly Width (mm)<\/th>\nStandard Assembly Width Formula<\/th>\n<\/tr>\n<\/thead>\n
5935-FT-VAC<\/td>\n19.05<\/td>\n25<\/td>\n13000<\/td>\n4\u201365<\/td>\n4\u201365<\/td>\n6.3<\/td>\nXLG<\/td>\n76.2<\/td>\n152.4<\/td>\nW = 76.2 \u00d7 N<\/td>\n<\/tr>\n
19.05<\/td>\n25<\/td>\n13000<\/td>\n4\u201365<\/td>\n4\u201365<\/td>\n6.3<\/td>\nPS<\/td>\n<\/tr>\n
19.05<\/td>\n25<\/td>\n7000<\/td>\n4\u2013105<\/td>\n4\u2013105<\/td>\n4.9<\/td>\nXP<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

* If the belt requires a non-standard width, please contact the salesperson. Standard assembly width W = 76.2 \u00d7 N mm, where N is the number of modules across the belt width.<\/p>\n

\"5935-FT-VAC<\/div>\n<\/div>\n
\n

Why UK Manufacturers Choose the 5935-FT-VAC<\/h2>\n
<\/div>\n

Beyond the fundamental vacuum-hold-down capability, this perforated flat top belt brings a set of operational advantages that directly reduce downtime, maintenance cost, and product rejection rates on UK production floors.<\/p>\n

\n
\n

Zero Product Marks<\/p>\n

The unbroken flat top surface means no embossing or pressure marks on packaging films, labels, or food products \u2014 a key requirement for high-care zones and premium branded goods.<\/p>\n<\/div>\n

\n

Modular Replacement<\/p>\n

Individual modules snap in and out without removing the entire belt from the frame. Maintenance teams can replace a damaged section during a short production break \u2014 no specialist tools required.<\/p>\n<\/div>\n

\n

\u03a7\u03b7\u03bc\u03b9\u03ba\u03ae \u03b1\u03bd\u03c4\u03bf\u03c7\u03ae<\/p>\n

XLG and PS grades withstand standard cleaning agents, sanitisers, and dilute acids used in food hygiene protocols. The XP grade maintains its properties through repeated thermal cycling in oven or sterilisation applications.<\/p>\n<\/div>\n

\n

High Line Speed Stability<\/p>\n

Uniform vacuum hold-down across the full belt width prevents product wandering or rotating at line speeds above 30 m\/min \u2014 improving downstream registration accuracy for printing, coding, and weighing stations.<\/p>\n<\/div>\n

\n

Custom Width Available<\/p>\n

Standard assembly follows W = 76.2 \u00d7 N mm. Where existing conveyor frames fall outside this range, non-standard width belts are manufactured to order with full technical documentation.<\/p>\n<\/div>\n

\n

Compact Return Path<\/p>\n

The 25 mm minimum backflex radius permits tight end drum diameters, allowing the belt to operate in low-profile conveyor frames \u2014 useful in cramped production areas or under-line transfer applications.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n

Where This Belt Is Used Across UK Industry<\/h2>\n
<\/div>\n

The 5935-FT-VAC Perforated Flat Top Vacuum Conveyor Belt serves a wide range of sector applications across England, Scotland, and Wales. The combination of vacuum stability, chemical resistance, and modular serviceability makes it a versatile choice wherever product control matters.<\/p>\n

\n
\n

Food & Bakery<\/p>\n

Transporting biscuits, crackers, sliced bread, and confectionery through packaging and checkweighing stations without product tumble or orientation loss.<\/p>\n<\/div>\n

\n

Pharmaceutical Packaging<\/p>\n

Blister packs and foil-sealed trays require mark-free flat surfaces and precise positioning for laser coding and vision inspection equipment.<\/p>\n<\/div>\n

\n

Print & Converting<\/p>\n

Printed sheets and labels are held flat by vacuum during guillotining, die-cutting, and inspection \u2014 eliminating misfeeds caused by static or airflow.<\/p>\n<\/div>\n

\n

Electronics Assembly<\/p>\n

PCBs and component trays travel through soldering and inspection stations with full orientation control, reducing rework caused by shifting during transit.<\/p>\n<\/div>\n

\n

Thermal Processing<\/p>\n

XP-grade modules handle continuous oven or pasteuriser conveying up to 105\u00b0C, replacing metal mesh belts on lines that demand a smooth, drip-free surface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n

Customer Success: Real Results<\/h2>\n
<\/div>\n

The following case illustrates how a mid-sized UK food manufacturer tackled belt-related downtime and product waste by switching to the 5935-FT-VAC \u2014 and the measurable results they achieved in the first quarter after installation.<\/p>\n

\n

Case Study \u00b7 Midlands, UK \u00b7 Biscuit Manufacturing<\/p>\n

Reducing Rejects by 34% on a High-Speed Wrapping Line<\/h3>\n

A family-owned biscuit producer near Coventry was running a 35 m\/min wrapping line using a conventional friction-top belt. At that speed, lightweight shortbread rounds would rotate by 5\u201315 degrees between the infeed and the flow-wrap head, causing the wrapper to misalign and triggering the reject gate on roughly 8% of product. The line ran two shifts, five days a week \u2014 the reject cost was significant and difficult to address mechanically without slowing output.<\/p>\n

After trialling the 5935-FT-VAC in XLG material over four weeks, angular drift dropped to under 1 degree. The reject rate fell to 5.3% \u2014 a 34% reduction \u2014 with no change to line speed. The modular construction also meant that when one module was chipped by a dropped tray, the maintenance team replaced it in under ten minutes during a scheduled break rather than pulling the belt for an overnight repair.<\/p>\n

Belt payback was estimated at under four months when factoring in reduced waste, saved rework labour, and eliminated unplanned maintenance shifts.<\/p>\n<\/div>\n

\n
\n

“We have been through three other belt suppliers in the past decade. This is the first perforated belt that actually holds our product consistently at full line speed. The modular design is a huge operational benefit.”<\/p>\n

\u2014 Engineering Manager, Bakery Goods Producer
\n\u039a\u03cc\u03b2\u03b5\u03bd\u03c4\u03c1\u03b9, \u0394\u03c5\u03c4\u03b9\u03ba\u03ac \u039c\u03af\u03bd\u03c4\u03bb\u03b1\u03bd\u03c4\u03c2, \u0397\u03bd\u03c9\u03bc\u03ad\u03bd\u03bf \u0392\u03b1\u03c3\u03af\u03bb\u03b5\u03b9\u03bf<\/span><\/p>\n<\/div>\n

\n

“Our pharmaceutical packaging line requires FDA-compliant materials and zero particle contamination. The XLG grade passed our internal validation first time. Lead time was shorter than any domestic supplier quoted us.”<\/p>\n

\u2014 Maintenance Director, Contract Pharma CMO
\nLeeds, Yorkshire, UK<\/span><\/p>\n<\/div>\n

\n

“The XP grade in our tunnel oven has now run eleven months without a single module replacement. Previous metal belts needed re-tensioning every six weeks. The weight saving also reduced our drive motor load noticeably.”<\/p>\n

\u2014 Production Manager, Ready-Meal Manufacturer
\nGlasgow, Scotland, UK<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n

Manufacturing Capability & Custom Solutions<\/h2>\n
<\/div>\n

Our production facility operates dedicated plastic modular belt extrusion and injection moulding lines with in-house quality control at every stage \u2014 from raw polymer granule to finished belt assembly. ISO-certified manufacturing processes govern dimensional tolerances, material traceability, and finished belt inspection before despatch.<\/p>\n

Customisation is a core part of what we do. If your UK conveyor line falls outside the standard width increments, our engineering team will calculate the correct module count, specify the rod diameter, and produce a non-standard width belt with the same quality standards as catalogue sizes. We regularly supply custom configurations to food, pharmaceutical, and industrial customers who need specific perforation ratios, coloured modules for HACCP identification, or mixed-material assemblies for multi-zone conveyors.<\/p>\n

Our technical sales team can advise on vacuum plenum design, fan sizing, belt tensioning, and drive sprocket selection \u2014 providing a complete system perspective rather than just a belt. Sample belts and full material data sheets are available on request.<\/p>\n

\n

Custom Belt Options Available<\/p>\n

Non-standard Widths<\/span>
\nHACCP Colour Coding<\/span>
\nCustom Perforation Ratio<\/span>
\nMulti-Material Assembly<\/span>
\nFull Technical Documentation<\/span>
\nSample Belts Available<\/span><\/div>\n<\/div>\n

Get a Quote \u2192<\/a><\/p>\n<\/div>\n

\n

\u03a3\u03c5\u03c7\u03bd\u03ad\u03c2 \u03b5\u03c1\u03c9\u03c4\u03ae\u03c3\u03b5\u03b9\u03c2<\/h2>\n
<\/div>\n
\n
\n

What is the best perforated flat top vacuum conveyor belt for food processing lines in the UK?<\/p>\n

For most UK food processing applications, the 5935-FT-VAC in XLG or PS material is the recommended starting point. XLG acetal copolymer suits dry environments and delivers excellent chemical resistance against standard food-safe sanitisers. PS polypropylene is preferred where frequent wet wash-down occurs. Both grades carry working temperatures from 4\u00b0C to 65\u00b0C and a working load of 13,000 N, covering the majority of food line speeds and product weights. If your line operates in a thermal processing zone above 65\u00b0C, the XP grade with its 4\u2013105\u00b0C range is the correct choice.<\/p>\n<\/div>\n

\n

How much does a perforated vacuum conveyor belt cost, and where can I get a price for a non-standard width in the UK?<\/p>\n

Pricing depends on belt width, material grade, and order quantity. Standard widths follow the W = 76.2 \u00d7 N formula, which keeps costs predictable and lead times short. Non-standard widths are produced to order and priced individually \u2014 typically within 24 hours of receiving your frame dimensions. To get an accurate quote for your specific application, email sales@plastic-modular-belt.com<\/a> with your belt width, length, material grade preference, and estimated operating conditions.<\/p>\n<\/div>\n

\n

Which plastic modular belt material should I choose for a pharmaceutical packaging conveyor operating in a UK clean room?<\/p>\n

The XLG (acetal copolymer) grade is most commonly specified for pharmaceutical packaging environments. It meets standard material compliance requirements, produces minimal particulate wear, and is dimensionally stable across the typical clean room temperature range of 15\u201325\u00b0C. The smooth flat top surface prevents product damage during transit, and the modular design facilitates belt inspection and section replacement during scheduled maintenance windows \u2014 an important consideration under GMP guidelines.<\/p>\n<\/div>\n

\n

How do I calculate the correct width when ordering a vacuum conveyor belt for my existing UK conveyor frame?<\/p>\n

The standard belt width formula for the 5935-FT-VAC is W = 76.2 \u00d7 N mm, where N is the number of belt modules assembled side by side. A 304.8 mm wide belt, for instance, uses N = 4. If your frame requires a width that does not divide evenly into 76.2 mm increments, please contact our sales team \u2014 we will produce a non-standard width and confirm the exact dimension before cutting the belt to length.<\/p>\n<\/div>\n

\n

Where can I find a reliable supplier of perforated plastic modular belts for UK food and packaging manufacturers?<\/p>\n

We supply the 5935-FT-VAC Perforated Flat Top Vacuum Conveyor Belt directly to manufacturers across England, Scotland, and Wales. Our belts are held in stock in the most common standard widths, with non-standard and custom configurations produced to order. Orders placed with full specifications are typically quoted within 24 hours and despatched within the agreed lead time. Contact us at sales@plastic-modular-belt.com<\/a> for availability and current delivery timescales to your UK location.<\/p>\n<\/div>\n

\n

When should I replace individual modules on a perforated flat top vacuum conveyor belt instead of replacing the whole belt?<\/p>\n

Module replacement is appropriate when isolated physical damage \u2014 chipping, cracking, or perforation blockage on one or two modules \u2014 is causing product hold-down problems without affecting the rest of the belt. Because the 5935-FT-VAC is fully modular, a single damaged section can be removed by disengaging the hinge rod and snapping in a replacement module, typically in under ten minutes. Full belt replacement becomes necessary when overall wear has reduced structural integrity across multiple modules, or when the belt has operated beyond its recommended service life for the given load and temperature conditions.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n

Ready to Specify?<\/p>\n

Talk to Our Conveyor Belt Specialists<\/h2>\n

Send your frame dimensions, operating conditions, and product type. Our technical team will confirm the correct material grade, width, and any custom requirements within 24 hours.<\/p>\n

Get a Quote \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

 <\/p>","protected":false},"excerpt":{"rendered":"

Perforated Flat Top Vacuum Conveyor Belt 5935-FT-VAC \u2014 plastic modular belt for food, pharma & packaging lines across the UK. Three material grades, custom widths available. Request a quote today.<\/p>","protected":false},"featured_media":1126,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[601],"product_tag":[],"class_list":["post-1123","product","type-product","status-publish","has-post-thumbnail","product_cat-belt","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/product\/1123","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/comments?post=1123"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/media\/1126"}],"wp:attachment":[{"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/media?parent=1123"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/product_brand?post=1123"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/product_cat?post=1123"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/plastic-modular-belt.com\/el\/wp-json\/wp\/v2\/product_tag?post=1123"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}